6CTA8.3-P220 (163kw@1500rpm)

You are here: Home » Products » 6CTA8.3-P220 (163kw@1500rpm)
Engine Model: 6CTA8.3-P220
Engine Type: Mechanical Engine
Displacement: 8.3 L
Rated Speed: 1500 rpm
Rated Power: 163 kw
Power Type: Prime Power
Emission Standard: Euro II
Fuel Consumption: 12.6-41.9 L/h
Cooling System water cooled
Dimension(L*W*H): 1159*734*1153 mm
Net Weight: 702 kg
Lead Time: 15-30 working days
Payment Term: T/T;L/C
Country of Original: China
Cummins 6CTA8.3-P220 Pump Engine

SpecificationCurveConfiguration & OptionsC SeriesPumpmacEMAC
General Information of Cummins Diesel Pump Engine
Engine Model 6CTA8.3-P220
Engine Type Mechanical Engine
Engine Structure 6-Cyl in-line
Displacement 8.3 L
Bore 114 mm
Stroke 135 mm
CPL Number CPL0399
Net Weight (with flywleel & alternator) 702 kg
Overall Diemension(L*W*H) 1159*734*1153 mm
Technical Specification of Cummins Diesel Pump Engine
Emission Euro II
Aspiration Turbocharged & Aftercooled
Fuel System Mechanical Pump + Electronical Governor
Eletrical System 12/24V
Lowest Starting Temp.(with/without auxiliary system) -35℃/-12℃
Engine Cooling Fluid Volume 12.3 L
Lubricating Oil Volume 18.9-15.1 L
Performance Data of Cummins Diesel Pump Engine
Rated Power/Speed 163kw/1500rpm
Max.Torque/Speed 1038 N.m/1500 rpm
Fuel Consumption @ Rated Power 12.6-41.9 L/h
Min. Idel Speed 750 rpm
Max. Continuous Running Altitude 1500 m
performance curves

PumpMac integrates pump-driven engines, air intake system, exhuast system, cooling system, engine control panel, WPT PTO solution, Advance Gearbox solution, chassis as options for our pump-driven power pack, the intelligent control modules and water pumps are also available under customers’ requirements.

Till now, only DCEC-Dongfeng Cummins Engine Company and CCEC-Chongqing Cummins Engine Company have official pump-driven series engines in their ranges of products, both DCEC and CCEC have mechanical and electronic engines that able to apply to different types of pump applications. The complete engine from Cummins factory are comes with standard scopes of supply, mainly includes below:

Fuel Injection System Flywheel Flywheel Housing Turbocharger
Intake Manifold Exhaust Manifold Starter Motor Alternator
Clamp & Hose Manual & Documents Oil Filter & Fuel Filter Water Pump & Oil Pump
Fuel-Cutoff-Solenoid
We also provide customize power pack with below options:
Engine Options
Flywheel;housing
(type;size)
Air Intake System.
(Air filter assembly)
Exhaust System
(Muffler assembly)
Cooling System
(Radiator or heat exchanger)
electric system
(12V/24V)
Two sets of batteries
(Another standby set)
Twin Starter System
(Spring or air starter)
Air Inlet Shut-off Vavlue
Power Pack Options
Cummins C series engine, with leading design, exquisite manufacturing technology, reliable and durable, suitable for high intensity and heavy load operation under harsh working conditions.
•Bosch inline fuel pump, more full combustion under high fuel injection pressure, less energy loss, stronger power, better fuel adaptability, lower emissions.
• Longer stroke, combustion gas expansion more fully, increase the effective power output, ensure the low fuel consumption under strong power.
• Air – to – air cooling and turbo – charging technology, better engine power performance.
•Advanced 4-air valve structure, more horsepower, more thorough air combustion, at the same time to increase the low speed torque, acceleration response fast, strong climbing.
• Articulated piston with forced cooling, capable of extremely high mechanical and thermal loads, comparable in strength to heavy duty engines.
• Enhanced cylinder block design, noise reduction, vibration reduction effect is significant.
•Fuel injector and symmetrical combustion chamber are arranged in the center; Make the mixture in the cylinder more uniform, combustion more full, lower emissions.
•Good fuel economy, long service life, durability and reliability is much higher than similar domestic engines.
•Holset supercharger with integral exhaust bypass valve, low speed response and strong power performance.
•Integral cylinder design, the number of parts is nearly 40% less than similar products, the failure rate is lower, the maintenance is more convenient.
•The cylinder sleeve is made of platform net honing design and corrosion-resistant high nickel cast iron piston, which greatly reduces oil loss, enhances durability and provides longer service life.
•Advanced design with higher engine power ratio up to 27.0kW/L
6CTA8.3 series
Type
Displacement
Rated Speed(rpm)
Rated Power (kw)

6CTA8.3-P220

8.3 1500 163

6CTA8.3-P230

8.3 1800 170

Pumpmac Introduction

PUMPMAC is one of the sub-brands of EMAC, focusing on all types of water pump applications, supplying pump drive engine, water pump, intelligent water pump control system and high reliability and cost-effective driven power pack solutions etc.

As officially authorized water pump OEM packager of world well-known brand such as Cummins and Deutz, EMAC provides customers with various options, including Cummins, Deutz, Perkins, Isuzu, Yuchai, Yangdong, Quanchai water pump engines, WPT PTO, advanced gearbox, water pump and the complete pump-driven power pack that integrates with air-intake system, exhaust system, cooling system and control system etc.

PumpMac provides customers with high reliability and cost-effective driven power pack solutions, and our products are widely applied to fire fighting, petrochemical explosion-proof, construction site, mine pumping, underwater operations, factory water supply and drainage, agricultural irrigation, pond culture, urban drainage, municipal repair, emergency rescue and other scenarios.

Warranty1000 running hours or 12 months warranty according to which comes first.
Promise Both back by our TSI quality control system and “123” after-sales system are guaranteed from production to application.
Support: Customized products supplying, marketing system support, technical support and after-sales service training.

pump engine pump PTO advance gearbox power pack

PTO

EMAC GROUP LIMITED

EMAC Group Limited was established in Hong Kong in 2010 with more than 10 years experience, and aims to be a solid one-stop supplier in the power machinery industry. EMAC operates four overseas subsidiaries and owns 8 self-registered trademarks. Our products are widely used in energy, maritime, automotive, construction, railways and spare parts.

EMAC has strategically partnered with highly leading companies and integrated the prospective businesses across all platforms, and become official authorized distributor. These star enterprises include CRRC Group, Fast Gear, Dongfeng Dana Axle, KangNi Technology (KNT), Hispeed Boat (HSB), Advance Gearbox, Foton Auto, DIMA Auto etc.

After years of development and accumulation, EMAC has more than 8,000 business partners in more than 100 countries and regions. With the rapid development of the world economic integration, we look forward to forging ahead in the field of machinery equipment with more global business partners, to enjoy a wonderful business career, to realize our dream of “Drive globalization to create a better world”.

Genmac seamac duramac pumpmac railways parts
Energy
Maritime
Automotive
Construction
Railways
Parts
EMAC’s Brands and Partners
Sinogen Suwin DCEC CCEC DDAC
Fast Advance Gearbox Deutz CRRC FOTON
Download
Data Sheet
Diagram
Maintenance
Operation Manual
Order Information
Other Items in this category
Request Form
Name: 
*
Email: 
*
Country: 
*
Message: 
Verification:  3 + 9 = ?
Please enter the answer to the sum & Click Submit to verify your registration.
 
Copyright 2008-2024 EMAC POWER LTD All Rights Reserved.
Sitemap | Top↑

naked african stunner filling her snatch with white dick.https://ceritaseks2.com tamilkamaveri very hot brunette fuck her toy.antarvasana